With a 26-foot platform height, a platform width of 32 inches and a 90-degree turning radius, the GS-2632 from Genie meets the demands of users who have had to use less productive methods to access a work area. The lift offers a number of safety features, including a dual axis tilt-level sensor that provides maximum utility and an audible alarm system that warns operators of unsafe conditions. The introduction of this scissor lift allows the factory manager or facilities maintenance supervisor to reach those hard-to-reach spots. www.genielift.com 800/536-1837
ARA Booth # 620
With its unique 24-volt battery-powered system, the new self-propelled Dino 125T trailer-mounted boom lift from Specialty Equipment can be operated any place where overhead access is needed. It features a 41-foot working height, 24-foot, 7-inch outreach and 474-pound platform capacity. The product has a powerful hydraulic drive system for traversing jobsites at up to 25 percent gradeability. Because it weighs just 3,200 pounds, it can be towed by SUVs or small pickups. www.specialtylift.com 800/328-3728
ARA Booth # 754
The new 800 Series telescopic boom lifts from JLG feature an innovative boom design that allows for a narrow machine width and low gross vehicle weight. The Models 800S and 860SJ are both housed on a fixed 8-foot, 2-inch wide frame. The 800S is a standard telescoping boom lift with an 80-foot platform height, and the 800SJ has a 6-foot articulating jib with an 86-foot platform height. The boom lifts have a total lift cycle from the ground to 80 feet and a return of less than 130 seconds. www.jlg.com 240/420-8721
ARA Booth # 120
Man Lift Engineering introduces the Ecstasy Series 45-, 65- and 85-foot telescopic booms. Designed with extensive options, the booms have electric power as well as gas and diesel and 43KVA insulated boom. The company also offers the Nirvana Series 40- and 60-foot booms. These booms have a 3,000-pound platform capacity and 1,000-pound dual jib material lift platform for wall and building construction. www.manliftengineering.com 262/633-5230
The Omega Arm 8T45EH telescopic handler from Omega Lift has an onboard computer and GPS link and provides automatic frame and fork leveling, load and boom extension limiting, load weighing, shift limiting, a vertical wall mode, built-in diagnostics and a full set of safety parameters. The machine operates on a Perkins 1004.42 or turbocharged 1004.40T engine. The handler is offered for loads up to 12,000 pounds. www.omegalift.net 905/857-6456